您的位置:首頁>>新聞中心>>上海潔淨室車間安裝高藤牌快速門。

上海潔淨室車間安裝高藤牌快速門。

上海潔淨室車間安裝高藤牌快速門。

來源:|作者:gaotengmen|發布時間: 2019-07-27|次浏覽

上海潔淨室車間安裝高藤牌快速門。 
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop. 
上海潔淨室車間安裝高藤牌快速門。【高藤门业】定制报价:常经理,0513-88380079,13818597388.专业生产PVC快速门,工业提升门,冷库快速门,硬质快速门,快速堆积门,洁净室快速门的优质厂家。

上海潔淨室車間安裝高藤牌快速門。
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop.

快速門廠家www.gaotengmen.com
快速卷簾門廠家www.gao-teng.com

Basic Standards for Installation of PVC Fast Rolling Curtain Doors
There are many installation standards for PVC fast curtain doors, which vary from manufacturer to manufacturer. Generally speaking, the basic standards for installing PVC fast rolling shutter doors are as follows:
1. Fast doors must be horizontal, horizontal and vertical, and must be on the horizontal line.
2. Installation and fixing of fast rolling shutter door should be firm and reliable, screw should be tightened in place, should not be tightened.
3. Fast shutter door control box, radar, motor and other components need to be carried out in accordance with the standards and specifications. If necessary, the PVC pipe must be inserted and the cable head should not be exposed.
4. The upper and lower parts of the guide rail must be fixed rather than fixed.
5. The range of radar adjustment should not be too close to avoid door failure. The installation position of safe infrared ray should be maintained on the horizontal line, and the horizontal line should not be inconsistent.
6. In the process of installing fast curtain door PVC fast curtain door, if we find that the fast curtain door has different sizes, the quality of the door is insufficient, and does not meet the site installation requirements, it is necessary to communicate with the relevant personnel in time, and communication can not be handled. The leadership of the company should be responded to immediately.


PVC
快速卷簾門安裝的基本標准

PVC快速卷簾門有許多安裝標准,安裝標准因制造商而異。一般來說,安裝PVC快速卷簾門的基本標准,具體內容如下:

1,快速門門保證水平,水平和垂直,必須在水平線上。

2。快速卷簾門的安裝和固定應牢固可靠,螺釘應擰緊到位,不應有松緊。

3,快速卷簾門控制箱,雷達,電機等組件需要按標准規範進行。如有必要,必須插入PVC管,並且不應暴露電纜頭。

4。導軌的上部和下部必須固定而不是固定。

5,雷達調節範圍不要太近,以免造成門體故障。安全紅外線的安裝位置應保持在水平線上,不得出現水平線不一致。

6。在安裝快速卷簾門PVC快速卷簾門的过程中,如果发现快速门有不同的尺寸,门的质量不够,不符合现场安装要求等,有必要及时与相关人员沟通,和沟通无法处理。应该立即回应公司的领导。


 

聯系方式

您的需要就是我們努力的方向!

電話:021-37820097 021-37820079
手機:13818597388 13564378713
郵箱:gaotengmy@126.com
地址:上海市松江區港業路558號12幢

我要留言

姓名

手機

郵箱

地址

留言